HPE 9000 and HPE e3000 Servers
Showing results for 
Search instead for 
Did you mean: 

Re: L3000 server issue

Go to solution
Frequent Advisor

L3000 server issue

How would I go about getting the server torecognise the dvd drive that is installed. Currently the only two boot paths displayed are, intscsia, and b which are the scsi drives. The search will not return the dvd drive at all. I am a little frustrated with this server at the moment, so any help would be great. Kevin
Acclaimed Contributor

Re: L3000 server issue


it should look like this:

Main Menu: Enter command or menu > sea

Searching for potential boot device(s)
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).

Path# Device Path (dec) Device Path (mnem) Device Type
----- ----------------- ------------------ -----------
P0 0/0/1/1.2 intscsib.2 Random access media
P1 0/0/2/0.2 intscsia.2 Random access media
P2 0/0/2/1.2 Random access media

the path 0/0/2/1.2 is the default for the internal DVD drive. Try to power cycle the server.

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Frequent Advisor

Re: L3000 server issue

Solution found. Thank you everyone.:)