HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

L3000 server issue

 
SOLVED
Go to solution
kevin poole_1
Frequent Advisor

L3000 server issue

How would I go about getting the server torecognise the dvd drive that is installed. Currently the only two boot paths displayed are, intscsia, and b which are the scsi drives. The search will not return the dvd drive at all. I am a little frustrated with this server at the moment, so any help would be great. Kevin
2 REPLIES 2
Torsten.
Acclaimed Contributor
Solution

Re: L3000 server issue

Hi,

it should look like this:

Main Menu: Enter command or menu > sea

Searching for potential boot device(s)
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).


Path# Device Path (dec) Device Path (mnem) Device Type
----- ----------------- ------------------ -----------
P0 0/0/1/1.2 intscsib.2 Random access media
P1 0/0/2/0.2 intscsia.2 Random access media
P2 0/0/2/1.2 Random access media

the path 0/0/2/1.2 is the default for the internal DVD drive. Try to power cycle the server.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
kevin poole_1
Frequent Advisor

Re: L3000 server issue

Solution found. Thank you everyone.:)