HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

LCD fault codes for D-class

 
Rajesh_35
Occasional Contributor

LCD fault codes for D-class

I am using hp 9000 d class server on lcd iam gatting error

FLT 5002
FLT CBF0
FLT CBF1
FLT CBFC


4 REPLIES 4
Thayanidhi
Honored Contributor

Re: LCD fault codes for D-class

Hi,

5002 - Bus transaction errors.
CBF0 - HPMC occured
CBF1 & CBFC - OS didn't load.

Look like you have corrupted OS.
Try to boot from alternate disk if boot/root
mirrored.

else try to boot from support CD and run diag.

TT
Attitude (not aptitude) determines altitude.
Adisuria Wangsadinata_1
Honored Contributor

Re: LCD fault codes for D-class

Hi there,

Based on the document on this url below :

http://www.docs.hp.com/hpux/pdf/A3262-90013.pdf

See chapter 6-9 about 'LCD-Indicated Problems' on pages 96

The FLT means a hardware error has been detected. So better you log call to HP and they will analyse this for you.

Hope this information can help you.

Best Regards,
AW
now working, next not working ... that's unix
Adisuria Wangsadinata_1
Honored Contributor

Re: LCD fault codes for D-class

Hi there,

May I know the model of your D-class machine ? You can run the 'model' command to check it.

If you have 'D-Class' service manual, you can identified the cause of this message.

Hope this information can help you.

Best Regards,
AW
now working, next not working ... that's unix
Kent Ostby
Honored Contributor

Re: LCD fault codes for D-class

So the HPMC error means you are failing from a hardware detected problem.

At bootup, do the following:

grep HPMC /var/tombstones/ts99

See if you have any codes that look significantly different from thsoe above (like 2xxx or 7xxx).

If you get a 2xxx then the CPU that logged it needs to be replaced.

Anything other then that will probably require a call to HPQ HW support.

Best regards,

Kent M. Ostby
"Well, actually, she is a rocket scientist" -- Steve Martin in "Roxanne"