Looking for SD3200 IOX blower P/N

[cartman_2]

Hi,

I have a failed cabinet blower on a IO expansion cabinet in a SD3200.

[Cabinet]
8 IOX 2/ 1/ N- 4/ 0/ N+ 2/ 0/ N+

Cabinet Blowers
===============
Fan 0 failed
Fan 1 ok

I/O Bay 0
===========
Fan 0 ok
Fan 1 ok
Fan 2 ok
Fan 3 ok

Bulk Power Supplies(BPS)
========================
Power Supply 0 ok
Power Supply 1 ok

From EMS output:

Device identification information:

Number of fans present...................: 2
Location of fan(s).......................: I/O expansion cabinet 8
Present fan number(s)....................: 0,1
Missing or failed fan number(s)..........: 0

I was triying to get a P/N for this blower, but with no success, If i'm correct this cabinet blowers refer to one of the 2 installed(4 possible) ICE fans installed is this correct?

there is no info on P/N in the df output of the IOX either.

Could you please give me a P/N for these blowers and confirm if these blowers are the ones on the rear on the ICE cabinet?

Thanks

[Torsten.]

I would expect to find the part number at partsurfer.hp.com - did you search there?

[cartman_2]

Yes, the problem is that in partsurfer there are serveral fan/blower part numbers inside the superdome 9000 server/IOX, and with the description I can't pinpoint the one that I need for the IOX blower:


A5201-62048 Blower module - Includes one blower and mounter hardware - Mounts on top of the chassis
A5201-04072 I/O fan module - Includes fan, finger guard, mounting bracket, cable, and operational, caution, and fuse
A5861-62022 Cooling fan for expansion utility chassis

So it was just in case someone new the correct partnumber and also if the cabinet blower that comes in the output of parstatus is tje blowers on the back of the ICE cab

[Torsten.]

I think the part in question is the XUC fan A5861-62014.