MP Login console

[Handover Saganya]

Hi Guys
I recentlry installed hp-ux11.23 after teh system was ready, i wanted to increase the space on the rhe file system and i had to comment out the file systems to unmount them, by mistake i also commented uot the hp-ux file systems, then i did reboot the machine, and it could nt start up proerly its now giving me the MP Login screen and i cant edit the file systems. when i reboot the machine by physically switching it off, it still comes back to that MP login with users Admin and Oper does anyone know how i can bypass this error.
thanks

[Torsten. · Accepted solution]

Try the default MP login Admin/Admin, switch to console, stop at boot menu and try to boot into single user mode.

HPUX> boot vmunix -is

[2xyo]

According to Torsten, try to reboot in single user mode OR in LVM maintenance mode :
-Stop boot process by hit any key
>boot pri
-Interact with IPL : Yes
-HPUX> hpux -lm

[Jupinder Bedi]

By default password for Admin user is Admin

than press co

and choose the server name you want to login

than boot the machine into single user mode

hpux -is

[AnthonySN]

What is your server model,
below is the doc for boot sequence on integrity models
http://docs.hp.com/en/5991-1247B_ed2/ch05s19.html

>> i wanted to increase the space on the rhe file system and i had to comment out the file systems to unmount them,

You dont have to comment out the file system to increase/unmount.
you can unmount the file system.
umount /mountpt
increase the size of the logical volume
lvextend -L /dev/vgname/lvolname
and then increase the filesystem.
extendfs -F vxfs /dev/vgname/rlvolname
if you have online jfs it can be done online without ummounting.

[AnthonySN]

correction..
lvextend -L finalsize /dev/vgname/lvolname