HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

MP(RP8400)reported an error!

 
SOLVED
Go to solution
leelangco_1
Frequent Advisor

MP(RP8400)reported an error!

FABRIC_XIN_TRY_LINK_INIT 05/12/2007 19:06:48
FABRIC_XIN_TRY_LINK_INIT 05/12/2007 19:06:47
PDH_BATTERY_LOW_WARNING 05/12/2007 19:05:53
ERR_TOC_TASK 05/12/2007 19:05:34
ERR_CPU_CHECK_SUMMARY 05/12/2007 19:05:34
ERR_TOC_TASK 05/12/2007 19:05:34
ERR_TOC_TASK 05/12/2007 19:05:34
ERR_CPU_CHECK_SUMMARY 05/12/2007 19:05:34
ERR_CPU_CHECK_SUMMARY 05/12/2007 19:05:34
FABRIC_XIN_TRY_LINK_INIT 05/12/2007 18:48:35
FABRIC_XIN_TRY_LINK_INIT 05/12/2007 18:48:35
PDH_BATTERY_LOW_WARNING 05/12/2007 18:47:41
ERR_TOC_TASK 05/12/2007 18:47:22
ERR_CPU_CHECK_SUMMARY 05/12/2007 18:47:22
ERR_TOC_TASK 05/12/2007 18:47:22

now the machine is working well,and there is not any error report from dmesg,event.log,ts99 and syslog.log.i donot clear the message above. anybody can help?i will wait online.thank you.
3 REPLIES 3
Steven E. Protter
Exalted Contributor

Re: MP(RP8400)reported an error!

Shalom,

I recommend a full hardware test:
cstm mstm or xstm test everything.

Also, I'd think it would be a good idea to have the battery on the UPS checked.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Andrew Rutter
Honored Contributor
Solution

Re: MP(RP8400)reported an error!

hi,

the main problem that I see is that the battery on the cell board is low and needs replacement.

this is a coin cell battery but needs to replaced with caution and there is a set way to do this.

You would be best to get HP to do it. Also a good test of system as already mentioned to make sure nothing else is failing. And make sure the firmware is upto date

Andy
leelangco_1
Frequent Advisor

Re: MP(RP8400)reported an error!

i know that rp8400 PDH hardware is carried on a small PDH riser board which plugs
into the cell board. but i donot clear which coin battery need to replace,is the one on the cell borad or the one on the PDH riser board?