HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

MP & GSP log and EMS tool

 
SOLVED
Go to solution
Manuales
Super Advisor

MP & GSP log and EMS tool

what is: the MP or GSP log?

somebody told me about EMS tool?
how can i know if i have it installed into the system and how can i start it?

thanks.
10 REPLIES 10
James R. Ferguson
Acclaimed Contributor
Solution

Re: MP & GSP log and EMS tool

Hi Manuales:

MP = Maintnance (or Management) Processor

GSP = Guardian Service Processor

The details differ slightly depending on the model of hardware your're using, so you should consult the hardware manuals for your specific system. In general they allow you to control and monitor the hardware.

EMS = Event Monitoring Service

EMS is used to perform software resource monitoring. You can download a current version from here:

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=EventMonitoring

Regards!

...JRF...

Manuales
Super Advisor

Re: MP & GSP log and EMS tool

hi ... thanks ..

it is installed into the server:
i tried to start it ..
$ /usr/sbin/xstm
Error: Can't open display

how do i have to use display?
Manuales
Super Advisor

Re: MP & GSP log and EMS tool

i did the following:

$ $ DISPLAY=192.100.200.300:0.0
$ export DISPLAY
$ echo $DISPLAY
192.100.200.300:0.0
$ /usr/sbin/xstm
Error: Can't open display: 192.100.200.300:0.0

192.100.200.300=my pc addres ...

why can not work?
James R. Ferguson
Acclaimed Contributor

Re: MP & GSP log and EMS tool

Hi (again) Manuales:

You can use 'cstm' in lieu of 'xstm'. The "c" means character-based whereas the "x" stands for the X-Windows based tool.

To use an X-windows tool you must set and export the DISPLAY environmental variable to match the IPaddress of the client (PC) on which the X-Window (or emulator) is running.

# export DISPLAY=$(who -uR|awk -v ME=$$ '$7==ME {print $8":0.0"}')

Regards!

...JRF...
Manuales
Super Advisor

Re: MP & GSP log and EMS tool

$ export DISPLAY=$(who -uR|awk -v ME=$$ '$7==ME {print $8":0.0"}')
$ echo $DISPLAY
mabcdefg.patito.com:0.0
$ /usr/sbin/xstm
Error: Can't open display: mabcdefg.patito.com:0.0

why does the error appear? !!!!!

Help please :0)