HPE 9000 and HPE e3000 Servers
Showing results for 
Search instead for 
Did you mean: 

MP console not working

Jeff Schussele
Honored Contributor

Re: MP console not working

Hi (again) Mohan,

Well, rp&410s *usually* ship with one or two 60A PDUs in the bottom of the rack. These PDUs have breaker switches for their multiple outputs. Check that all of these breakers are switched on. Again turning ON these breakers will not reboot/reset the server(s)**** BUT *** switching OFF a PDU output could. So DO NOT switch any of them off.

PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Occasional Advisor

Re: MP console not working

All my PDU switches r ok,already i checked PDUs andall.One thing in MP/SCSI core I/O card MP power LED is ON.it means my MP core I/O card is ON?,and 100BT LED is flashing green.It means 100T activity is there all my LED indications are telling as normal.But i can get display in console and through LAN.
any possiability is there for restarting MP core I/O card in HPUX.