HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

MP in rp7410

 
nightwich
Valued Contributor

MP in rp7410

Hi all

I can't acess to the MP in my rp7410.

I already replace the network cable it no success.

The are 3 light in the MP lan console the first from the left is linking and the last from the right have light. I think the correct is the middle one linking and the last from the right have light.

I already try to access true a direct console connect to the MP. But no luck yet.

Here can I go from here. How can I do a reset ?

Thanks in advance.
10 REPLIES 10
Johnson Punniyalingam
Honored Contributor

Re: MP in rp7410

>>>Here can I go from here. How can I do a reset ?<<<

try login to server via "root" telnet/ssh

# stty +queryGSP < /dev/GSPdiag1

# stty +resetGSP < /dev/GSPdiag1
Problems are common to all, but attitude makes the difference
nightwich
Valued Contributor

Re: MP in rp7410

Hi Jonshon

The complex is all shutdown.

I can't login in to servers. There is why I need to login to the GSP/MP

Thanks
Michal Kapalka (mikap)
Honored Contributor

Re: MP in rp7410

hi,

you can't connect to the console ???

1, you have physical access to the server ??


2, GSP ( LAN ), there is some configuration, do you know the IP ???


check this thread from ITRC :

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=45715

response from "Caesar"

mikap
nightwich
Valued Contributor

Re: MP in rp7410

Hi Michal

Thanks by your post


I have physical access to my complex/GSP.

I now the IP of the LAN CONSOLE. But is not working

ping time out

He have connect a physical console directly to the MP true the Console port ( nine pins ). But no luck too.

I have try the reset but that you suggest in the link. But still no luck.

Any ideas ? What possible could be wrong ?

Thanks ..

I will assigned some points after solve the problem .
Michal Kapalka (mikap)
Honored Contributor

Re: MP in rp7410

hi,

if you have physical access to the server,

you oculd connect with a cross cable to the server and on the desktop/laptop you could set a IP from you range that have the GSP, for example GSPIP : 10.36.100.121 and your PCIP :
10.36.100.1 if your net is : 10.36.100.0/24

mikap