1748232 Members
3407 Online
108759 Solutions
New Discussion юеВ

MP port issue

 
resolve of disks fails
Occasional Advisor

MP port issue

Hi All,

In rp server, i can able to log in mp via console cable but with the network i am not able to log in. IP add & network cable both are correct

Please help me out.

Regards
Vishal

5 REPLIES 5
Robert-Jan Goossens
Honored Contributor

Re: MP port issue

Hi Vishal,

Just wondering if this could be a switch port setting problem. I don't know what kind of rp server you have, but the mp port is usually 10/100mb.

Ask your network guys to check the settings on the switch port, it should be 10 or 100mb fixed no autoneg.

Regards,
Robert-Jan
sujit kumar singh
Honored Contributor

Re: MP port issue

Hi

are you able to ping to the MP IP address, see if from the Network Telnet is disabled on the Switch Ports.

alternatively if you can ping from the MP Lan IP see if that Secure Access is there.

CM>SA (Set Mp Access)

Like on my system this is

[hpkol] MP:CM> sa


SA

This command allows you to modify MP access configuration.

Current Set Access Configuration:
R - Remote/Modem : MANAGEMENT ACCESS
T - Telnet : Enabled
W - Web SSL : Enabled
- - SSH : Disabled (MP Feature Not Licensed)
I - IPMI over LAN : Enabled


regards
sujit
resolve of disks fails
Occasional Advisor

Re: MP port issue

Thanks for your support ,the problem was with switch there was no uplink in switch .Can any one send me the steps how to set the MP LAN ip address.
Robert-Jan Goossens
Honored Contributor

Re: MP port issue

Hi,

Example of the MP IP configuration on a RP7420.

http://docs.hp.com/en/A7025-96024/ch04s04.html#babgddie

Regards,
Robert-Jan
Andrew Rutter
Honored Contributor

Re: MP port issue

hi,

its relatively easy to configure the netwotk parameters in the MP

login in to the MP as administrator, issue cm command and then lc command

cm>lc

do you want to modify network paramters? y/n

answer y and change items as required

Andy