HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Management processor password

 
HPquestion
Regular Advisor

Management processor password

How I can change management processor password ?
6 REPLIES 6
Geoff Wild
Honored Contributor

Re: Management processor password

If you need to reset - there is a reset switch on the back of most systems on the MP - which will clear the cmos, ip, passwords.

Default login is: Admin with password Admin

On some systems, you have to remove the cover to reset the MP.

If you know the password, then once in, goto cm menu, then so - Configure Security Options and Access Control


Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
HPquestion
Regular Advisor

Re: Management processor password

I don't see any sub menu any configuration option there after I enter CM. Am I missing something?
Matti_Kurkela
Honored Contributor

Re: Management processor password

The MP passwords are specific for each user account, and there can be several. After going to Command Menu (CM), select UC for User Configuration. It will allow you to edit the features of the user account(s), including the password.

If you want to see all the commands available in the Command Menu, type "HE LI" for HElp, LIst of commands. You can also just type HE for HElp and follow the prompts.

MK
MK
HPquestion
Regular Advisor

Re: Management processor password

Thanks! I did CM and then UC. After that its not giving any option to alter the password.

Enter number for more detail, or [Q] to Quit: 1
1


Current User Parameters:
User Login ID : Admin
User Password : ************
User Name : Default Admin
User Workgroup :
User Access Rights : Console access, Power control, MP configurati
User administration
User Operating Mode : Multiple
User Enabled/Disabled : Enabled
Modem Dial-back : Disabled
Modem Dial-back Phone :


User Configuration Menu:
L - List current users
N - Add a New user
C - Change a current user
D - Delete a current user
Matti_Kurkela
Honored Contributor

Re: Management processor password

Now press C, "Change the current user", and it will ask you which thing you wish to change.
At that point, you can choose to change the password.

MK
MK
HPquestion
Regular Advisor

Re: Management processor password

Just after posting my another question, found that its working as you have suggested.Thanks for all the replies!