HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Messsage form GSP

 

Messsage form GSP

Hi,

Can any one tell me or give solution why I am getting this message from GSP console soon after rebooting one of ouy HP 5470 server.


Messages:

04/29 16:12:44 10028 ARP 01 13986 Error Code: 28 errno value: 0 Diagnostic: SE
RIOUS

04/29 16:12:44 10028 ARP 01 13986 Error Code: 28 errno value: 0 Diagnostic: ME
DIUM

04/29 16:12:44 10028 ARP 01 13986 Error Code: 28 errno value: 0 Diagnostic: SE
RIOUS

04/29 16:12:44 10028 ARP 01 13986 Error Code: 28 errno value: 0 Diagnostic: ME
DIUM

04/29 16:12:45 10028 ARP 01 13986 Error Code: 28 errno value: 0 Diagnostic: SE
RIOUS

04/29 16:12:45 10028 ARP 01 13986 Error Code: 28 errno value: 0 Diagn
04/29 16:12:51 11020 SFMT 04 4260 Error Code: 20 errno value: 0 Diagnostic: SE
RIOUS

04/29 16:12:51 11020 SFMT 01 4259 Error Code: 20 errno value: 0 Diagnostic: SE
RIOUS

04/29 16:12:55 17002 FTPT 01 4282 Error Code: 2 errno value: 0 Diagnostic: MED
IUM


Thanks


Utpal K. Das
To know the best on HP-UX
4 REPLIES 4
Robert-Jan Goossens
Honored Contributor

Re: Messsage form GSP

Hi,

Fire up xstm and check if there are errors/messages. Did you check your GSP for any messages ?

Regards,
Robert-Jan
Shaikh Imran
Honored Contributor

Re: Messsage form GSP

Hi,
Are you getting any messageg in syslog.log file ?
Also please check the mail for root.

Pls provide more available details.


Regards
I'll sleep when i am dead.
Bharat Katkar
Honored Contributor

Re: Messsage form GSP

Uttpal, why don't you see the GSP logs in detail:
1. Log in from console.
2. Press B
3. Look for SL option, System Logs Options.
4. Select EL option to see error logs.
There you will the source of the problem.
It also provide you with the Hex Code
which you can decode to pinpoint the exact cause of error.

You need to know a lot to actually know how little you know
Naveej.K.A
Honored Contributor

Re: Messsage form GSP

Hi utpal,

Is the attention/fault light on amber/red...

any serious errors reported to the GSP will make the fault light glow as red.
Is your system booting to the multi user mode?

As robert mentioned. check up the system with stm if the online diag bundle is installed.

Regards
naveej
practice makes a man perfect!!!