HPE 9000 and HPE e3000 Servers
1748170 Members
4310 Online
108758 Solutions
New Discussion юеВ

Re: Model I70 Business Server

 
SOLVED
Go to solution
Jim_366
Advisor

Model I70 Business Server

Looking for dimensions, pictures, and power specs for the 9000 series 800 l70 server. Please.
4 REPLIES 4
Sameer_Nirmal
Honored Contributor
Solution

Re: Model I70 Business Server

Here are the details :

Power Specifications for Model I70:
Description Specification(3)
AC Input Voltage Range (1) 90 to 132 VAC and 180 to 264 VAC (Autoranging)
Load(2) Voltage Frequency AC Input Current(3)
Maximum 100 VAC N/A 12 A
Maximum 240 VAC N/A 6 A
Typical 100 VAC 50 Hz 7.7 A
Typical 120 VAC 60 Hz 6.5 A
Typical 208 VAC 60 Hz 4.1 A
Typical 220 VAC 50 Hz 4.1 A
Typical 240 VAC 50 Hz 3.8 A
Description Specification(3)
AC Inrush Current (single cycle) 100 A peak
AC Input Power 760 W max, 510 W (Typical)
Power Supply Output Rating 480 W DC (240 W from each power supply)
AC Input Line Frequency 47 to 63 Hz
Transient Tolerance Voltage Duration Rise/Fall Time
Low Energy 3000 V 10 ├В┬╡s 500ns
High Energy 1000V 1.2 ├В┬╡s rise
Description Specification
Holdup without System Reset 20 ms @ 50Hz (1 cycle)
Battery Backup Time 15 minutes with optional battery

Caution: The system must have both power cords connected to AC outlets, both of which are protected by the same fuse. If one of the cords is not connected, the system will not turn on. Notes: (1) The power supply is an auto-ranging power supply. It does not have to be preconfigured to operate over its rated operating voltages. However, the system should not be operated at voltages between the two input voltage ranges. (2) Typical load assumes 384 MB memory, six internal peripherals, the 64 MHz CPU and three PBA-FL interface cards. (3) The data reflects power input from two power cords to two power supplies. Each power supply can provide power for up to three internal peripherals.

Environmental Specifications for Model I70:
Description Specification
Operating Temperature 5├В┬░C to 40├В┬░C (41├В┬░F to 104├В┬░F)
Non-operating Temperature with internal DDS-format drive (without tape media) -40├В┬░C to 65├В┬░C (-40├В┬░F to 149├В┬░F)
Non-operating Temperature with internal DDS-format drive (tape media limit) -40├В┬░C to 65├В┬░C (-40├В┬░F to 113├В┬░F)
Maximum Rate of Temperature Change (without tape media) 20├В┬░C (36├В┬░F)/hour
Maximum Rate of Temperature Change (with tape media) 10├В┬░C (18├В┬░F)/hour
Temperature Setpoint Description Setpoint
High Speed Fan (Activated) 30├В┬░C to 38├В┬░C (86├В┬░F to 100.4├В┬░F)
Overtemp Warning 40├В┬░C to 48├В┬░C (104├В┬░F to 118├В┬░F )
Overtemp Hardware Shutdown Overtemp Warning +2├В┬░C (approx. 3├В┬░F)
Description Specification
Operating Humidity 20% to 80% RH, max wet bulb=26├В┬░C, noncondensing
Non-operating Humidity 5% to 805 RH, noncondensing, less than 30% RH/hr rate of change
Maximum Operating Altitude 3048 m (10,000 ft)
Non-operating Altitude 4573.2 m (15,000 ft)
Heat Dissipation 2600 BTU/hr (3)
Operating Vibration (random) 0.0001 g2/Hz, 5 to 350 Hz, -6 db/Octave, 350-500 Hz, 0.000005 g2/Hz, 500 Hz (~0.21Grms)
Non-operating Vibration (sine) 0.5gpeak 5 to 500 Hz
Shock (Non-operating) Edge drop from 2.5 in above floor
Sound Power ~ 5.8 Bels (A weighted) at 37├В┬░C


Physical Specifications for Model I70:
Description Specification
Width 444 mm (17.48 in)
Height 430 mm (16.93 in)
Depth 533 mm (20.98 in)
Weight 50 kg (110 lbs.)
Note: All physical specifications are given with the unit unracked

Jim_366
Advisor

Re: Model I70 Business Server

Thank you for the quick responce! You wouldn't happen to have the same information on the I40?
Sameer_Nirmal
Honored Contributor

Re: Model I70 Business Server

Same specifications applies to following models as well besides I70.
Models: 857, 867, I30, I40, I50, I60.
Jim_366
Advisor

Re: Model I70 Business Server

Thanks....you guys ROCK!