HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Modem access to MP

 
SOLVED
Go to solution
kw_1
Contributor

Modem access to MP

I'm need to setup a modem on our rp7410. There is a remote port on the MP card. My question are, if I hooked up a modem to that port, will the user have access to MP? Do I need to install a separate mux card for the modem in order to pervert MP access from modem users?
1 REPLY 1
Darren Prior
Honored Contributor
Solution

Re: Modem access to MP

Hi,

If you're using the GSP's remote port then it can be configured for session mode, meaning that it is just a serial port with a getty running on it for a normal login. You can (through the GSP) set the port so that it is only used for GSP access. So, if the port is in session mode the user cannot switch it to GSP mode.

If you were to use a separate mux card then it is purely a serial port and has no GSP access.

regards,

Darren.
Calm down. It's only ones and zeros...