HPE 9000 and HPE e3000 Servers
1748060 Members
4874 Online
108758 Solutions
New Discussion юеВ

Re: Modem configuration on HP rp4440

 
Richard Smith_10
Occasional Contributor

Modem configuration on HP rp4440

Hi,
I am trying to configure a dial-out/in modem on a HP RP4440 system. I have connected the modem to the 'remote' connector of the 3-way MUX port and selected both ports 2 and 4 in SAM, but the modem is not responding in either case of dial-in or dial-out.
any ideas on how to resolve this issue ...

best regards

Richie Smith
2 REPLIES 2
Alexander M. Ermes
Honored Contributor

Re: Modem configuration on HP rp4440

Hi there.
Try to find something from this URL :

http://forums1.itrc.hp.com/service/james/searchForums.do?searchText=Modem+Configuration&searchCriteria=allwords&searchOptionITRC=true&searchCategoryITRC=HP-UX&searchCategoryBSC=ALL&searchIn=entireThread&author=&threadType=0&datePosted=0&sortOption=score&resultsPerPage=25&x=36&y=6

Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"
Richard Smith_10
Occasional Contributor

Re: Modem configuration on HP rp4440

Thanks for the info Alexander.

I managed to get it working by changing the port speed via the MP. I adjusted the speed down to 9600 and it started talking to the modem