HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Moving MP console to system console

 
SOLVED
Go to solution
rana786
Regular Advisor

Moving MP console to system console

Hi all,

I am facing problem when I want to move from mp console to system console connecting to the MP lan interface. It displays following. How can I solve it?

MP login: Admin
MP password: *****

[mplan] MP> co

- - - - - - - - - - - - Live Console - - - - - - - - - - - -

[Read only - use Ctrl-Ecf for console write access.]

[Read only - use Ctrl-Ecf for console write access.]

[Read only - use Ctrl-Ecf for console write access.]

Rgds,
Mostafa
Walker_dhk
6 REPLIES 6
Steven E. Protter
Exalted Contributor

Re: Moving MP console to system console

Shalom Mostafa,

I suggest you check the system physically and see what if anything is connected to the console port. If its clear and GSP is reset, you should have console access.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Matti_Kurkela
Honored Contributor

Re: Moving MP console to system console

It actually says what you should do, but it is not exactly obvious. Do the following, quickly:

Hold down Ctrl.
Press E key.
Release Ctrl.
Press C key.
Press F key.

If you get another "Read only..." message, you were not quick enough.
MK
rana786
Regular Advisor

Re: Moving MP console to system console

Hi,
There is nothing connected to the console. How can I reset the gsp?

Another thing when I press Ctrl+E following C and F then it says [bumped user- Admin].

Please help.
Rgds,
Mostafa
Walker_dhk
Sung Oh
Respected Contributor

Re: Moving MP console to system console

Hi

When you get the "bumped user- Admin]" message, press "enter" to get your active console. it means you are accessing MP console as Admin rights.

Regards,
Sung
AwadheshPandey
Honored Contributor
Solution

Re: Moving MP console to system console

Press Ctrl+Ecf and Enter, You will get desire either console login are MP Login.

The cause for this problem is you have connected to system console to another way by network [some ip configured for MP] or remote modem. and this connection has a write permission.
Pls see the link for detail
http://web.tampabay.rr.com/batcave/GSPinfo.htm

Cheers,

Awadhesh
It's kind of fun to do the impossible