My server restarts with no explication

[GRANDIERE]

I wonder if my GSP configuration is OK. Where can i find GSP documentation on internet ?

This is my current GSP configuration :
____________________________________________
AC
Current Alert Display Configuration:
Automatic Display of System Alerts: Disabled
Alert Threshold: 5
Timeout: 180 seconds.
____________________________________________
The automatique restart is enabled. Is that parameter the explication of the retarts ?
--------------------------------------------
AR
Current System restart settings:
Automatic System restart: Enabled
Alert Level Threshold: 13
____________________________________________
I don't anderstand that log. Is that mean my server reboots automaticaly whereas No failure detected !
--------------------------------------------
Log Entry # 0 :
SYSTEM NAME: lloiret
DATE: 07/22/2005 TIME: 07:26:14
ALERT LEVEL: 0 = No failure detected, forward progress

SOURCE: 1 = processor
SOURCE DETAIL: 1 = processor general SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail

CALLER ACTIVITY: C = system initialization STATUS: 8
CALLER SUBACTIVITY: EF = implementation dependent
REPORTING ENTITY TYPE: E = HP-UX REPORTING ENTITY ID: 00

0xF8E000001100CEF8 00000000 0000CEF8 type 31 = legacy PA HEX chassis-code
0x58E008001100CEF8 00006906 16071A0E type 11 = Timestamp 07/22/2005 07:26:14
Type CR for next entry, Q CR to quit.
____________________________________________

Thanks for help.

Regards,

Dahu.

[Devender Khatana · Accepted solution]

Hi,

The AR command allows the operator to enable, disable, and configure the
Automatic System Restart (ASR). ASR is triggered by each alert level value
that is configured. For instance, for levels 12 and higher, you would
specify alerts "12 13 14 15" for the triggering condition.

The default is level 13. Setting ASR for alert levels below 10 is strongly
discouraged.

Yes, when a level 13 alert is triggered, your system will restart. This option should be disbaled. Also "Automatic Display of System Alerts" should be enabled.

HTH,
Devender

[GRANDIERE]

Hi,

Thanks for your help.

I will enable the automatique display.

I anderstand that my configuration allow the automatique restart when Alert Level bellow 13. So i don't anderstand why my system restarts ?! The Log entry#0 shows a boot with alert level on 0.

Would you see another reason that would explain theses restarts ?

Thanks for your help.

[Devender Khatana]

Hi,

It can not be told with this one entry itself. You should have some other logs in /var/adm/syslog/OLDsyslog.log or /var/adm/crash etc to know more about it.

Also you can try checking the entries in the following logs in GSP.

Also take some time to assign points to the responses to your questions as your profile shows you had never did that. Here are your questions which require this.

http://forums2.itrc.hp.com/service/forums/pageList.do?userId=BR762263&listType=unassigned&forumId=1

HTH,
Devender

[GRANDIERE]

Hello,

I just undesdand what you meaned by assigning points. I made my work.

You will see in attachement the OLDsyslog.

Thanks for help.

Regards,

Dahu.

[Devender Khatana]

Hi Dahu,

It seems you had more reboots in between. So can not indicate anything about reboot. After every reboot the current syslog.log is copied to OLDsyslog.log. So a OLDsyslog.log will not point anything is you had more than one reboot after the automatic reboot.

Anyway thanks for taking your time to assign points. It helps in improving the forum.

Regards,
Devender

[GRANDIERE]

Ok,

The next time the server will reboot automatically, i will capture the OLDsyslog.log

Thanks for help,

Regards,

Dahu

[GRANDIERE]

Hi,

My server reboots tonight.

See the syslog.log in attachment.

[GRANDIERE]

... and the OLDsyslog.log

But i can't see any log that would explain my the server stops.

Thanks for help.

[generic_1]

Have you glanced at your tombstone files for problems?