HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

N 4000 Attentation LED Blinking

 
Vinod_22
Advisor

N 4000 Attentation LED Blinking

Hi,
I have HP9000 N class 4000 Series 4CPU server,the momoent Server switch it on an attentation LED is blinking. When I noticed back side of the server left side also inside the m/c one LED was blinking?
Can you help the what's going wrong with my server.

Reagrds

Vinod
3 REPLIES 3
Michael Tully
Honored Contributor

Re: N 4000 Attentation LED Blinking

From the system console use control-B
That's control and b together.
Go into the logs using 'sl'. Select 'e' for errors and report them back here.
Anyone for a Mutiny ?
Shaikh Imran
Honored Contributor

Re: N 4000 Attentation LED Blinking

Hi,
Just go to Console
Type Cntrl+B keys together you will get into GSP (Guardian Service Provider).
you will get a prompt like
CM>
type sl
CM> sl
this will ask you which log you want to see
type e ( for error logs)
Then it will ask for filtering
Type "n" for no filtering.
Then you will see the log and the attention LED will stop blinking.
Some error logs may be critical and needs to be looked into while maximum are warnings only.
YOu can always use syslog for critical error logs.
FYI
GSP : This is a new feature from rp series of HP9000.

Regards,


I'll sleep when i am dead.
Bharat Katkar
Honored Contributor

Re: N 4000 Attentation LED Blinking

Hi Vinod,
Have a look at the thread below.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=621750

Keep the attached doc for your reference in future.

Regards,
You need to know a lot to actually know how little you know