HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

N4000 Aor B model?

 
SOLVED
Go to solution
doris grady
Frequent Advisor

N4000 Aor B model?

Is there a resource that i can use within HP find out if an N4000 is an A or a B without physically looking at it? I have the Serial Number -- USM4032589 -- but am not physically located with the server.
Thanks.
4 REPLIES 4
DCE
Honored Contributor

Re: N4000 Aor B model?

stm (or xstm if you prefer gui) will allow you to get the model number

Dave
Robert-Jan Goossens
Honored Contributor

Re: N4000 Aor B model?

Hi,

Or log into the GSP and check the firmware revision.

Control B on the console.

GSP> he

-->
A.01.12 -> revision A
B.02.20 -> revision B

HTH,
Robert-Jan

Sameer_Nirmal
Honored Contributor
Solution

Re: N4000 Aor B model?

Run following cstm commands to get the required information
#echo "selall;info;wait;infolog;view;done" | cstm >/tmp/cstm.txt
# cat /tmp/cstm.txt

The output of would give product number just below the Model string.
If it is A3639A , then it N4000 A
If it is A3639B , then it N4000 B

Jesse Dougherty
Honored Contributor

Re: N4000 Aor B model?

Doris, that serial number comes up as a B version, follow the link below and it will give you a little information about your USM4032589 / N4000. Type in the serial number and A3639B.

http://www2.itrc.hp.com/service/ewarranty/warrantyInput.do

Jesse
Cypress Technology Inc