HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

NClass HP 4000 Loss Configuration

 
SCSI Error
Regular Advisor

NClass HP 4000 Loss Configuration

What board should we replace if we have a server N Class HP 4000 that loss its configuration. what board is it?
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: NClass HP 4000 Loss Configuration

Hi SCSI Error (what a nickname!),

there are batteries on the system board and the MP/core IO board.
Do you receive any battery related messages in the logs (MP system log)?

Could be "battery low" or "battery failed".

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrew Rutter
Honored Contributor

Re: NClass HP 4000 Loss Configuration

hi scsi,

It really depends upon the configuration lost?

The system configuration at PDC or configuration on GSP?

has the server been running? just crashed? or rebooted or just powered on after not bee used for a while?

Also which N4000 is it? rev A,B or C

As torsten says it may well be just the coin cell dead? check with volt meter

Apart from that does the server power up normally and run

Andy