HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

NEW to the SUPERDOME

 
SOLVED
Go to solution
Edward J. Segura
Frequent Advisor

NEW to the SUPERDOME

I am very, very new to the Superdome and was wondering if anyone has a class reference number for me to look at taking. Again this is the first Superdome we have in our area. I need the best class that suits me. Thx
3 REPLIES 3
Jeff Schussele
Honored Contributor

Re: NEW to the SUPERDOME

Hi,

Here's an introductory course - H4831AAE

http://education.itrc.hp.com/TrainerII/en_US/catalog/catalogDetail.jsp?id=tprodid002730


Rgds,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Jeff Schussele
Honored Contributor

Re: NEW to the SUPERDOME

HI (again),

Here's the partitioning course H4832AAE

http://education.itrc.hp.com/TrainerII/en_US/catalog/catalogDetail.jsp?id=tprodid002731

Rgds,
Jeff

PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Alzhy
Honored Contributor
Solution

Re: NEW to the SUPERDOME

Edward,

If you're an HP Vet, then there's basically no need for you to go to training. The Patitions Guide, the man pages (all commands that start with "par") should be more than enough. What is important is you get "time" on this SuperDome, play with it a while with manual and ITRC on hand and you'll even understand better than those who went to class.

Of course, if you're in it (The Training) for the "Vacation" and the "perks".. go Ahead. who does'nt? ;^ )

Some more pointers:

Familiarise yourself with the GSP commands
Understand the components (Cellboards, Cabs, chassis.. etc)
Understand and TRY what each par?? command does.
Understand the repercussions of shutdown -R
And finally, test drive that X-Windows GUI - "parmgr"..


HTH.
Hakuna Matata.