HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Need SNMP MIB for HP9000 D270 server

 
daniel_338
Occasional Visitor

Need SNMP MIB for HP9000 D270 server

I want to find the OIDs for system environment variable monitoring on the HP D270 server. Can not seem to locate the MIB for this server anywhere. Can anyone help? I already checked on the product pages, and the support/driver download section as well. Many thanks!
to be or not to be, that's a whole lot of 1's
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: Need SNMP MIB for HP9000 D270 server

Hi Daniel,

there is no special MIB for this kind of servers, I guess. You can't read environmental values like temperature, fan speed, power consumption ... from this box. Only standard - like LAN interface - is possible.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
daniel_338
Occasional Visitor

Re: Need SNMP MIB for HP9000 D270 server

Hi Torsten,

Thanks for the information. What I actually wanted to monitor was

Temperature
Cpu type
Fans status
Hard disk status
System description <- This is in MIB2
Uptime.

So environmental stuff is a no go, does this mean that CPU and Uptime, Disk status is also unavailable for this platform?

I suppose if the MIB is unavailable then the answer is not ;o)

D:)
to be or not to be, that's a whole lot of 1's
Torsten.
Acclaimed Contributor

Re: Need SNMP MIB for HP9000 D270 server

I'm not sure about CPU type, HDD and uptime are available with SNMP (maybe the OS will pass this info to the protocol), but there is no info about fans and temp - I'm sure.
BTW, the fans are not redundant, so you don't need to monitor - if a fan is failed, your system is off.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Need SNMP MIB for HP9000 D270 server

maybe you can find something here (at least uptime):

.iso.org.dod.internet.private.enterprises.hp.nm.system.hpux.

try something like "snmpwalk" or a SNMP browser to find some values.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!