Need the Part Nos of installed memory and HDD of running HP System

[jain]

Hi
I do i know the part nos of a running HP 9000 server with hpux 11.00.
I reasin why i want this to upgrade my server.
I have an HP9000 L 2000 server with
2* 440Mhz PA9500 Processors and 1 GB RAM
I need to upgrade the RAM to 2 GB ,How do i what is the current ,memory PART No and how many slots are free.

pls help me

[Robert-Jan Goossens · Accepted solution]

Hi Jain,

Try this command,

# echo "selclass qualifier memory;info;wait;infolog" | cstm

Regards,
Robert-Jan

[Bernhard Mueller]

Jain,

the L2000 has 8 slot pairs (DIMMS are installed in pairs, one pair is a "module")

run
# echo "selclass qualifier memory;info;wait;infolog"|cstm > /tmp/meminfo
# cat /tmp/meminfo*

There you will see the currently installed DIMMS, size and slots.

For part nos. to to
http://partsurfer.hp.com

Regards,
Bernhard

[Sunil Sharma_1]

Hi,

use stm to get these information.

Sunil

[jain]

Memory Board Inventory

DIMM Slot Size (MB)
--------- ---------
0a 256
1a 256
0b 256
1b 256
--------- ---------
System Total (MB): 1024

got this way
I need to upgrade system to total 2GB Ram how do i go about what is the part No

[Robert-Jan Goossens]

Hi,

You have 4 256 MB DIMM's

A5554A 256MB ECC DIMM high-density memory upgrade kit - Includes two 128MB SDRAM DIMM modules

A5797A 512MB ECC DIMM high-density memory upgrade kit - Includes two 256MB SDRAM DIMM modules

A5798A 1024MB ECC DIMM high-density memory upgrade kit - Includes two 512MB SDRAM DIMM modules

A6114A 2048MB ECC DIMM high-density memory upgrade kit - Includes two 1024MB SDRAM DIMM modules

A6115A 2048MB ECC high-density memory upgrade kit - Includes two 1024MB SDRAM DIMM modules

above are the part numbers for the upgarde dimms, you will need to add 2 X 1024 MB.

Regards,
Robert-Jan

[jain]

Oh
Do u mean i need to remove old 256*4 Modules and put 1024*2.
Is it possible to put 512*2 with old config.then how will i populate the banks

[Robert-Jan Goossens]

Hi,

Check this doc for more info.

http://www.docs.hp.com/hpux/onlinedocs/A5191-96022/A5191-96022.html

Regards,
Robert-Jan

[Sยภเl Kย๓คг]

Jain

I would suggest u better go for fresh memory,don't use the old one.
A6114A is the partno 1024MB * 2.
Check up http://partsurfer.hp.com.I think offeres are available with buyback of old memory
regards
SK
sunilhcl@rediffmail.com

[Iain Ashley]

Jain,
For best performance with any HP-UX system. Go for as many DIMMS as possible. The memory in PA-RISC and HP Integrity servers is interlaced (striped) and the more stripes the better performance. You can get a huge increase in memory bandwidth if you were to use 8 256Gb DIMMs it would give you the best performance. Obviously it would reduce your ability to further expand in the future.

Regards
Iain Ashley