HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Need to configure ILO GSp at HP machine

 
Salm
Frequent Advisor

Need to configure ILO GSp at HP machine

Any body can tell me how to Configure ILO GSP on HP server ?

Regards

4 REPLIES 4
Mel Burslan
Honored Contributor

Re: Need to configure ILO GSp at HP machine

I think this question is more suited to the HP hardware servers forum.

Initially, you need to connect a dumb HP terminal to the serial console port and hit ctrl-B to start.

if the interface has never been initialized, you should be okay hitting enter for username and password questions to get the GSP prompt.

If you are at this level, and want to configure the LAN Console interface, you need to type LC and follow the prompts with intelligent answers.

If you want to configure something else (what I don;t know since I have not done one for quite a while) you need to ask that explicitly and I am sure someone will be able to help.
________________________________
UNIX because I majored in cryptology...
Mel Burslan
Honored Contributor

Re: Need to configure ILO GSp at HP machine

also see this link for help on general GSP use and configuration:

http://web.tampabay.rr.com/batcave/GSPinfo.htm
________________________________
UNIX because I majored in cryptology...
D Block 2
Respected Contributor

Re: Need to configure ILO GSp at HP machine

ILO RILO or GSP, be clear about your request here
Golf is a Good Walk Spoiled, Mark Twain.
Salm
Frequent Advisor

Re: Need to configure ILO GSp at HP machine

Thanks