1748169 Members
3925 Online
108758 Solutions
New Discussion юеВ

Not able to MP

 
SOLVED
Go to solution
Mutum
Frequent Advisor

Not able to MP

I'm traying to access my HP-PA 9000-800,rp3440, through consle, to get MP and check some system event, I'm able to connect, but always give to OS login session, before I was able to access MP.
Any advise.
BAGI
8 REPLIES 8
RAC_1
Honored Contributor

Re: Not able to MP

Try resetting the MP.
There is no substitute to HARDWORK
Mutum
Frequent Advisor

Re: Not able to MP

Thank RAC.
But sorry to say how ?
BAGI
Arunvijai_4
Honored Contributor

Re: Not able to MP

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=594450
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=976975

Looking at these threads will be helpful.

-Arun
"A ship in the harbor is safe, but that is not what ships are built for"
Delrish
Trusted Contributor

Re: Not able to MP

You should use "Ctrl+b" for gaining access to it.
Shameer.V.A
Respected Contributor
Solution

Re: Not able to MP

If You invoke ctrl+B, M/C will give you MP menu, from that you can select console, VFP, Command Menu, Console Logs, Chasis Logs Menus.

shameer
.... See invisible, feel intangible and achieve impossible as everything is possible ....
Sivakumar TS
Honored Contributor

Re: Not able to MP

Dear Muatasim,

From OS login session, press Ctrl+B to get the MP Menu.

From there you can navigate to MP>CM etc,

When you need to go to OS session again,

do MP>CM>CO

hth,

Siva.
Nothing is Impossible !
Shameer.V.A
Respected Contributor

Re: Not able to MP

Hi Siva,
From Main Menu, which is invoked through Ctrl+B, only you have to give "co" for getting console. "CM" is for giving service commands & status commands.

shameer
.... See invisible, feel intangible and achieve impossible as everything is possible ....
Mutum
Frequent Advisor

Re: Not able to MP

Thanks to all,

Through cntrl+B I managed to get to Co.

BAGI