HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Not able to access partition in superdome

 
Ramprasath_1
Occasional Advisor

Not able to access partition in superdome

Hi

I'm having Superdome server with 3 cell boards populated. One cell board is one hard partition. Each hard partition is having 3 Virtual partitions( vpars ). Now i'm not able to access one of the hard partition through Console. Other 2 partitions i can access.
I'm able to access the console but if i select the particular partition no(i.e 0), i cant.

In the same time i can access the other 2 (no 1 & 2) partitions. But in the 0 partition applications are working fine. Telnet is also i'm getting. But only problem is not getting through console. I cant able to toggle to any of the three vpars in that hard partition through Cntl+A also. Pls help me to solve this issue.

Waiting for ur reply

Ramprasath.G
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Not able to access partition in superdome

Hi,

please check your running processes if one of them owns the console (just in case an application started from this console is hung).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ramprasath_1
Occasional Advisor

Re: Not able to access partition in superdome

Thanks for ur reply.....
Problem solved after reseting the whole hard partition
Ramprasath_1
Occasional Advisor

Re: Not able to access partition in superdome

closing the thread