cancel
Showing results for 
Search instead for 
Did you mean: 

OPS

 
David_492
Advisor

OPS

Dear all

I have two HP rp8400 servers and SAN solution.

I have 4 Database two databases on each server, does one RAC (OPS) is enough in my case? Or I need more than one RAC in order to chive no single point of failure.
In other words is there any limitation for the Operating system?

Does the RAC works on the level of the heartbeat or not?

Finally, I would like to hear from you what u suggest to me in this case
Thank you all
3 REPLIES 3
Joshua Scott
Honored Contributor

Re: OPS

David,

I would humbly suggest that if you had handed out points to *any* of your 56 questions, you would be getting more help. Many on this forum find it frustrating to try to help someone who leaves no feedback to the people who are giving they're own time to help. I would ask that for the sake of all those who will read your questions in the future, that you would assign points according to how much each post helped you solve your problem. This will enable future (and present) readers to see which answer solved/helped with your problem.

Josh
What are the chances...
Jeroen Peereboom
Honored Contributor

Re: OPS

David,

some general information can be found at http://h18004.www1.hp.com/solutions/enterprise/highavailability/oracle-wp.html

JP.
Jeroen Peereboom
Honored Contributor

Re: OPS

David,

Josh is right. I like to help, but points are welcome too.

Start on you profile page http://forums1.itrc.hp.com/service/forums/publicProfile.do?userId=CA1040841&forumId=1
and spend some time assigning points...

JP.