OpenGL runtime libs for Series 800 10.20 ?

[Cossalter]

Hello all,

is there a (free) downloadable runtime OpenGL lib for a HP 9000/879 machine (K-series) (and where) ?
Until now I found only versions for our 11.0 machine and for the 10.20 Series 700 machines.
We need it to be able to run a commercial program on our machine.

Thanks for any hint

Oliver

[Denver Osborn]

Have you seen this?

https://software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/try.pl?productNumber=B6196AA&date=

It's a download for OpenGL libs for s700_800 on 10.20

[Denver Osborn]

hmm, it didn't make the link.

Just cut and paste the link to your browser. It'll take you to a registration/download page for OpenGL runtime.

[Cossalter]

Thank you for your hint.

I'll downloaded this trial package and tried to install it, but swinstall complains:

swinstall -s /tmp/b6196aa_10.20.depot \*

======= 04/18/01 16:49:30 METDST BEGIN swinstall SESSION
(non-interactive)

* Session started for user "root@hp003".

* Beginning Selection
* Target connection succeeded for "hp003:/".
* "hp003:/tmp/b6196aa_10.20.depot": This source is a tape
device.
* "hp003:/tmp/b6196aa_10.20.depot": Cannot open the logfile on
this target or source. Possibly the media is read-only or
there is a permission problem. Check the daemon logfile and
"/var/tmp/swagent.log" on this host for more information.
ERROR: Could not apply the software selection "*" because there are
no product variations that are compatible with the destination
host(s). To select incompatible software, specify the "-x
allow_incompatible=true" option on the command line.
* Software selection failed for
"hp003:/tmp/b6196aa_10.20.depot".
ERROR: No software has been selected.
ERROR: Cannot continue the "swinstall" task.
* Selection had errors.



======= 04/18/01 16:49:33 METDST END swinstall SESSION
(non-interactive)

It is the same message as for the Series700 package. Does it mean that also this package
is not suited for our HP9000/872 (K-Series) machine ?

Regards

Oliver

[Denver Osborn · Accepted solution]

Oliver,

It was bugging me not knowing so I looked in the itrc knowledgebase. Doc ID S3100008803 explains how to install it. In a nutshell you can install it by forcing the installation. Turn off enforce dependecy and script errors. Also install patches PHSS_19269 and PHSS_17225.

For details look at the ITRC Doc ID also search for keywords OpenGL 800.

[Cossalter]

The cited Doc ID doesn't work for me. Nothing found, but probably I have no access to it.

But nevertheless your advice in a nutshell was enough. Now ADAMS runs.

Thanks Denver Osborn

Oliver