cancel
Showing results for 
Search instead for 
Did you mean: 

PDC NClass

 
SOLVED
Go to solution

PDC NClass

I have a N4000 with PDC Revision 40.25, i want to know if i can upgrade PDC to 43.43 or i need install another pdc before ?
4 REPLIES 4
Robert-Jan Goossens
Honored Contributor

Re: PDC NClass

Hi,

No. You should take a look at your current HWE and QPACK patch bundles and the STM version.

http://www.software.hp.com/portal/swdepot/displayProductsList.do?category=ER

11.0 patch

http://www4.itrc.hp.com/service/patch/patchDetail.do?BC=patch.breadcrumb.main|patch.breadcrumb.search|&patchid=PHSS_31214&context=firmware:osinit

11.11 patch

http://www4.itrc.hp.com/service/patch/patchDetail.do?BC=patch.breadcrumb.main|patch.breadcrumb.search|&patchid=PHSS_30724&context=firmware:osinit

Best regards
Robert-Jan
Robert-Jan Goossens
Honored Contributor
Solution

Re: PDC NClass

add on.

Take a look at this patch revision history.

http://www4.itrc.hp.com/service/patch/patchDetail.do?BC=patch.breadcrumb.main|patch.breadcrumb.search|&patchid=PF_CPIW4343&context=firmware:cpu

Regards,
Robert-Jan
Andrew Rutter
Honored Contributor

Re: PDC NClass

hi,

No you do not need to step the pdc updates.

Yu can just download the patch listed above and run the update.

I prefer the later one in preference and boot it on a bootable dat tape, but make a full backup before commencing just to be sure.

Andy

Re: PDC NClass

I'm sorry but i submit a wrong point to Robert the correct is 10.