HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

PDC Upgrade on a L1000

 
SOLVED
Go to solution
HDgio
Regular Advisor

PDC Upgrade on a L1000

Hello
I want install a PHSS_30576 on a L1000, but I want do it not from swinstall but from tape.
How I can put the .frm in a tape ?
How I can take it from a depot ?
Thanks to all
5 REPLIES 5
melvyn burnard
Honored Contributor
Solution

Re: PDC Upgrade on a L1000

it is documented in the patch text, Installation Instructions section:

To put this patch on a magnetic tape and install from the tape drive, use the command:

dd if=/tmp/PHSS_30576.depot of=/dev/rmt/0m bs=2k

My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Pete Randall
Outstanding Contributor

Re: PDC Upgrade on a L1000

You can copy the patch depot to a tape with the following:

swpackage -s /tmp/PHSS_30576.depot -x target_type=tape @ /dev/rmt/0m

You can then install from the tape with:

swinstall -x autoreboot=true -x patch_match_target=true -x /dev/rmt/0m


Pete

Pete
HDgio
Regular Advisor

Re: PDC Upgrade on a L1000

Dear Friends
I remember what I have put a .frm in a tape and I have boot from a tape for install a new PDC but how ?
Bye
Bernhard Mueller
Honored Contributor

Re: PDC Upgrade on a L1000

Hi,

you will find it here:

http://www4.itrc.hp.com/service/patch/patchDetail.do?BC=patch.breadcrumb.main|patch.breadcrumb.search|&patchid=PF_CRHW4401&context=firmware:cpu

Regards,
Bernhard
HDgio
Regular Advisor

Re: PDC Upgrade on a L1000

thanks to all