HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

PDC and GSP Firmare

 
manu_9
Frequent Advisor

PDC and GSP Firmare

whats the difference between PDC Firmware patch and GSP Firware patch .How to obtain those for N4000-55 machine .I am getting the following error in my syslogfile
Line 5003in /ux/core/kern/common/io/pat_psm.c: pat_get_olar_info - rc -1 slot_id -16121979


Does this an indication of updating the pdc firmeware
5 REPLIES 5
Michael Tully
Honored Contributor

Re: PDC and GSP Firmare

GSP = guardian service processor
The PDC firmware normally refers to CPU.

You can start to look for firmware starting here.
http://www2.itrc.hp.com/service/patch/search.do?pageContextName=firmware:&BC=patch.breadcrumb.main|patch.breadcrumb.pdb|
Anyone for a Mutiny ?
Sridhar Bhaskarla
Honored Contributor

Re: PDC and GSP Firmare

Hi,

I would check any OLAR related patches first like PHKL_30447.

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
Cheryl Griffin
Honored Contributor

Re: PDC and GSP Firmare

The pat_get_olar_info message indicates you need to update your PDC firmware on the machine.

http://www1.itrc.hp.com/service/patch/mainPage.do
Find individual patches --> firmware
Step 2: Enter your model
For example N4000 (click search)

The most recent set:
11.00 http://www2.itrc.hp.com/service/cki/patchDocDisplay.do?patchId=PHSS_30723
11.11 http://www2.itrc.hp.com/service/cki/patchDocDisplay.do?patchId=PHSS_30724
"Downtime is a Crime."
manu_9
Frequent Advisor

Re: PDC and GSP Firmare

Hi Sridhar ,
I am not able to find the patch you mentioned .Thanks to all who have replied .
Cheryl Griffin
Honored Contributor

Re: PDC and GSP Firmare

He referenced
PHKL_30447 s700_800 11.11 iCOD,vPars,IPMI,PDCnbcall,OLA/R AB however, the PDC firmware patch that was recommended previously has been documented to stop the pat_get_olar_info messages.
"Downtime is a Crime."