HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Parstatus command hanging

 
Daniel M. Gonzales
Frequent Advisor

Parstatus command hanging

Trying to run parstatus command on an rp7420, but it keeps hanging on me. Unable to break out of command, must terminate telnet session. Anyone else see this before? Ideas?
2 REPLIES 2
Sameer_Nirmal
Honored Contributor

Re: Parstatus command hanging

Do you have PHKL_30523 and PHKL_33338 patch installed if you are running 11.11 ?

What is the system firmware version on the server MP -> CM -> SYSREV ?
Daniel M. Gonzales
Frequent Advisor

Re: Parstatus command hanging

Sameer-

I called the Response Center. Looks like problem is old firmware. Until we can get firmware upgrade scheduled, she had me clear the MP bus...from the CM prompt on the MP, we used the "ru" command. This ended up clearing all the outstanding (21 of them) parstatus cmds. So we have a temporary solution and a long-term solution. Thanks for your help!

-Dan