HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Power Trust UPS for rp3440

 
Antonio Saucedo
Occasional Advisor

Power Trust UPS for rp3440

I have a doubt

I must install a sofware additional to configure the UPS, or just edit the following archives and start up ups_mond demon?

/etc/ups_conf
/etc/inittab

Regards
AS
3 REPLIES 3
Sameer_Nirmal
Honored Contributor

Re: Power Trust UPS for rp3440

No, You probably don't need another software like UPS Manager etc.

What model of the PowerTrust UPS you have?

Select the correct UPS port device and do the configuration as you have stated. That should take care of.
Torsten.
Acclaimed Contributor

Re: Power Trust UPS for rp3440

Hi,

it depends on the UPS model.
Most legacy models work with the ups_mond, others need special software - it really depends.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Antonio Saucedo
Occasional Advisor

Re: Power Trust UPS for rp3440

Are there some list of compatibility?

I have a UPS of third, but I dont know if it is going to work