HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Powerfail logging with ls3 (LanSafe III)

 
ITB
Occasional Advisor

Powerfail logging with ls3 (LanSafe III)

Hello all,

we're using a IA64 rx2620 server (HP-UX 11.23) with an installed ups (R3000XR). The UPS is managed by LanSafeIII (v1.0) and the process /usr/ls3/ls3 is running.

In case of a powerfailure there is only a message that appears on the console and entry in the eventlog of MP/GSP.

Does anyone know how to get ls3 configured that such messages will be added into the /var/adm/syslog/syslog.log ?!

Thanks,
Frank
1 REPLY 1
Robert-Jan Goossens
Honored Contributor

Re: Powerfail logging with ls3 (LanSafe III)

Hi Frank,

The LanSafeIII software uses /opt/ls3/Log as a logfile. I don't know if you can change this. Try to start the utility.

To start the command line menu:
# /opt/ls3/ls3con

To start the graphical user interface export your DISPLAY variable and start:
# /opt/ls3/ls3conX

Hope this helps,
Robert-Jan