Probably hardware error

[Peter Day_2]

Guys,
I am getting several of FLT error codes when I trying doing a 'SEA'rch from the Boot Main Menu.

These are as follows -

FLT BUS 5108, 5408, 5208
FLT TRAPS CBF0, CBF1, CBFC

This system is a K460, which we use for trash an burn....guess I've really burnt it this time!.

Any help would be very helpful.

Thanks,
Pete

[Robert-Jan Goossens]

Hi Peter,

FLT CBF0 HPMC handling initiated

FLT CBF1 OS did not replace PDC IVA

FLT CBFC Branch to OS HPMC failed

If you have some kind of hardware support I would call HP.

Hope this helps,
Robert-Jan

[Ravi_8]

Hi Pete

I would log call with HP in such errors on my machines

[Peter Day_2]

Robert-Jan,
I wish we did have a support contract for this server.

Is this something that I may be able to rectify.

We do have several other servers that I can canabalise.

Regards,
Pete

[Scot Bean]

Is there any more info on the HPMC from the SERvice menu?

Go there and use the PIM command to see if any more detail is available.

--------

Brute force: remove / swap hard drives, IO cards to see if you can make the problem go away. Since it happens during SEArch cmds. it my be IO-related.

[Tim Sanko]

Hope you put out the flames...

[Joshua Scott]

FLT 5108 = Processor Memory Bus Broad Fault, Slot #1, Bus #0

FLT 5408 = Same, but Slot #4.

FLT 5208 = Same, but Slot #2.

Have you made any hardware changes since last bootup? (even reseating/replacing parts)

Josh

P.S. Yes, Help should be helpful ;)