HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem in accessing the MP of rx7620 server !!

 
Ahmed Saleem
Advisor

Problem in accessing the MP of rx7620 server !!

Hi,
I am facing a problem while accessing the MP of rx7620 server. i don't have the MAC add for that server, so how i can access the MP of that server. is there any default ip ...
4 REPLIES 4
Shaikh Imran
Honored Contributor

Re: Problem in accessing the MP of rx7620 server !!

Hi,

To Reset the MP:
If the MP RESET button is held for longer than five seconds, it will clear the MP password and reset the LAN, RS-232 (serial port), and modem port parameters to their default values.

LAN Default Parameters
IP Addressâ 192.168.1.1

Subnet maskâ 255.255.255.0

Default gatewayâ 192.168.1.1

Default Username/Password:
User : Admin
Password : Admin


Hope This Helps,


I'll sleep when i am dead.
Ahmed Saleem
Advisor

Re: Problem in accessing the MP of rx7620 server !!

By resetting the MP
Is the H/W partition is also lost ... or not
Kindly, reply as soon as possible
Ahmed Saleem
Advisor

Re: Problem in accessing the MP of rx7620 server !!

By resetting the MP
Is the H/W partition information is also lost ... or not
Kindly, reply as soon as possible
Sivakumar TS
Honored Contributor

Re: Problem in accessing the MP of rx7620 server !!

Dear Ahmed Saleem,

Resetting of MP wont affect the partition informartion, the nPAR will not be affected.

With Regards,

Siva.
Nothing is Impossible !