Problem with console

[Rene Mendez_4]

HPUX 11.11
Server rp7405 with 2 partitions

The console es disable, when connect to console from MP no found.

I kill the process /usr/sbin/getty console console this reset the process but not found.

The process is respowd in the /etc/inittab

Regards
RenÃ

[Jeff Schussele]

Hi Rene,

When you connect to the console (CO) through MP it asks for the partition number (Partition 0 or Partition 1) - are you giving it the proper partition number?

Also you usually have to login to the MP using username: Admin PW: Admin

Also if you're using an HP terminal like a 700/96, you may need to reset the terminal by powering it down & holding the "D" key down for several seconds at power up.

HTH,
Jeff

[Rene Mendez_4]

The exact entry en the inittab is :
cons:123456:respawn:/usr/sbin/getty console console # system console

[Jeff Schussele]

OK - I'm not quite sure what you're asking here.

And are these partitions hard (nPars) or virtual (vPars)?

If you're using vPars then ctrl-A toggles the console between virtual partitions. The virtual partition active will be the last one accessed - not necessarily the #0 partition.

HTH,
Jeff

[Rene Mendez_4]

Hello

I reset the Master and Slave MP for hardware and now present de consol login:

The problem is resolv

Regards.
RenÃ