HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with console

 
Rene Mendez_4
Super Advisor

Problem with console

HPUX 11.11
Server rp7405 with 2 partitions

The console es disable, when connect to console from MP no found.

I kill the process /usr/sbin/getty console console this reset the process but not found.

The process is respowd in the /etc/inittab

Regards
RenÃ
4 REPLIES 4
Jeff Schussele
Honored Contributor

Re: Problem with console

Hi Rene,

When you connect to the console (CO) through MP it asks for the partition number (Partition 0 or Partition 1) - are you giving it the proper partition number?

Also you usually have to login to the MP using username: Admin PW: Admin

Also if you're using an HP terminal like a 700/96, you may need to reset the terminal by powering it down & holding the "D" key down for several seconds at power up.

HTH,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Rene Mendez_4
Super Advisor

Re: Problem with console

The exact entry en the inittab is :
cons:123456:respawn:/usr/sbin/getty console console # system console
Jeff Schussele
Honored Contributor

Re: Problem with console

OK - I'm not quite sure what you're asking here.

And are these partitions hard (nPars) or virtual (vPars)?

If you're using vPars then ctrl-A toggles the console between virtual partitions. The virtual partition active will be the last one accessed - not necessarily the #0 partition.

HTH,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Rene Mendez_4
Super Advisor

Re: Problem with console

Hello

I reset the Master and Slave MP for hardware and now present de consol login:

The problem is resolv

Regards.
RenÃ