HPE 9000 and HPE e3000 Servers
1753550 Members
4968 Online
108795 Solutions
New Discussion юеВ

Problem with k570

 
SOLVED
Go to solution
Rajet
Occasional Visitor

Problem with k570

We have the following errors, after a system panic, can anybody help to tell us whether it was hardware.

attachment ts99, shutdownlog, crash
4 REPLIES 4
cnb
Honored Contributor
Solution

Re: Problem with k570

At first glance, it appears that one of your processors isn't reporting. O/S reports 6, but the tombstone only shows information for 5. What happened to processor 5?
cnb
Honored Contributor

Re: Problem with k570

Looking further there are runway parity errors being reported and processor 5 isn't reporting in. Looks like h/w.

HTH

Ron Irving
Trusted Contributor

Re: Problem with k570

Right to the chassis codes:

FLT 7D05 Processor Memory bus parity fault (HPMC)

Start by pulling all but cpu0 and memory carrier 0. Once booted, add c cpu's one at a time until it fails.

Hope this helps.
Should have been an astronaut.
Prashanth.D.S
Honored Contributor

Re: Problem with k570

Hi Rajet,

This seems to be a 6 CPUs system, issue is with box is that CPU5 caused this HPMC get the same replaced...

CPU part number: A3641-69222 its a 220MHz processor..


Best Regards,
Prashanth