HPE 9000 and HPE e3000 Servers
1752803 Members
5596 Online
108789 Solutions
New Discussion юеВ

Re: Problem with k570

 
SOLVED
Go to solution
Rajet
Occasional Visitor

Problem with k570

We have the following errors, after a system panic, can anybody help to tell us whether it was hardware.

attachment ts99, shutdownlog, crash
4 REPLIES 4
cnb
Honored Contributor
Solution

Re: Problem with k570

At first glance, it appears that one of your processors isn't reporting. O/S reports 6, but the tombstone only shows information for 5. What happened to processor 5?
cnb
Honored Contributor

Re: Problem with k570

Looking further there are runway parity errors being reported and processor 5 isn't reporting in. Looks like h/w.

HTH

Ron Irving
Trusted Contributor

Re: Problem with k570

Right to the chassis codes:

FLT 7D05 Processor Memory bus parity fault (HPMC)

Start by pulling all but cpu0 and memory carrier 0. Once booted, add c cpu's one at a time until it fails.

Hope this helps.
Should have been an astronaut.
Prashanth.D.S
Honored Contributor

Re: Problem with k570

Hi Rajet,

This seems to be a 6 CPUs system, issue is with box is that CPU5 caused this HPMC get the same replaced...

CPU part number: A3641-69222 its a 220MHz processor..


Best Regards,
Prashanth