HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID CONTROLLER PROBLEM

 
machaya chivaviro_2
Occasional Advisor

RAID CONTROLLER PROBLEM

have an rp4440 HP9000 running HP-UX 11.1.
My problem is that when I try to connect the disks to the RAID controller the system freezes. But this does not happen on the other controller. How can I solve this problem.
Please help.
Here is the hardware path and driver information.
Hardware
Path Driver Description Status

0/2 lba Local PCI-X Bus Adapter (783) CLAIMED
0/2/1/0 PCItoPCI PCItoPCI Bridge CLAIMED
0/2/1/0/4/0 mpt HP AB290-60001 PCI/PCI-X U320 SCSI 2-port U320 SCSI/2-port 1000B-T Combo Adapter CLAIMED
0/2/1/0/4/0.0.0 sdisk COMPAQ BF1468A4CC CLAIMED
0/2/1/0/4/0.1.0 sdisk COMPAQ BF1468A4CC CLAIMED
0/2/1/0/4/0.2.0 sdisk COMPAQ BD14689BB9 CLAIMED
0/2/1/0/4/0.3.0 sdisk COMPAQ BD14689BB9 CLAIMED
0/2/1/0/4/0.4.0 sdisk COMPAQ BD14689BB9 CLAIMED
0/2/1/0/4/0.5.0 sdisk COMPAQ BD14689BB9 CLAIMED
0/2/1/0/4/0.7.0 sctl Initiator CLAIMED

0/6/0/6 lba Local PCI-X Bus Adapter (783) CLAIMED
0/6/1/0 PCItoPCI PCItoPCI Bridge CLAIMED
0/6/1/0/4/0 ciss PCI-X SmartArray 6402 RAID Controller CLAIMED
0/6/1/0/4/0.7.0 sctl Initiator CLAIMED
1 REPLY 1
Torsten.
Acclaimed Contributor

Re: RAID CONTROLLER PROBLEM

Hi,

what is your disk device (MSA?)?

Did you try to connect the cable while the system is running?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!