RP 2470

[logaraman]

Hi,

We have installed 11.23 on RP2470 and the server goes down regularly. We are unable to find nothing in the syslog.

Any suggestions

[Dennis Handly]

Do you have crashdumps enabled? Do you have any in /var/adm/crash/?

Have you looked in /etc/shutdownlog?

[logaraman]

Hi i am unable to find anything inside /var/adm/crash and in my shutdownlog , i have only a single entry reboot which was done yesterday..,

How do i enable crash

[Dennis Handly]

>How do i enable crash

See crashconf(1M) & rc.config(4) & rc(1M).
And most importantly: /etc/rc.config.d/crashconf

[logaraman]

Hi ,

I have the crash enabled by default.

Any suggestions and also clarify if RP2470 supports 11.23

[Dennis Handly]

>clarify if RP2470 supports 11.23

It looks like it:
http://docs.hp.com/en/5991-8010/ch02s03.html
PA-RISC Servers.
* HP 9000 rp24x0 and rp34x0 series

[logaraman]

Hi Dennis,

Thsnka for your update. Any suggestions on why the server goes down often.. I am in the progress of installing the latest QPK and HW bundle patches for the same

[Dennis Handly]

>Any suggestions on why the server goes down often.

Well, you need to find out where it was logged.
It was either shutdown/rebooted. Or it crashed.

Or somehow the power was just turned off.
Do you have any of the boot messages indicating if it did a fsck(1m)?

Have you looked in /etc/rc.log?
(Check to see if crash dumps enabled and if "Save system crash dump if needed".)

[Andrew Rutter]

hi,

are there any idications in the GSP logs?

post the last 3 or 4 errors logged here.

login to gsp and type sl followed by e and then n to no filters

control b
sl
e
n


Also check and post what firmware version you are running at PDC and GSP

Andy

[logaraman]

HI,

Shall post the GSP logs once the server goes down again...