HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RP 4440 Memory carrier board upgradation

 
SOLVED
Go to solution
Madhu Gopalakrishnan
Occasional Visitor

RP 4440 Memory carrier board upgradation

Please clarify the following query regarding RP4440 Memory carrier board upgradation.

whether A9739B(32-DIMM memory carrier board) supports with A7135A (Dual 1.0 GHZ PA 8800) processor.
13 REPLIES 13
Murat SULUHAN
Honored Contributor

Re: RP 4440 Memory carrier board upgradation

Hi Madhu

Base 4440 systems come with one dual core PA8800 1 GHz CPU. For this configuration you must select one memory carrier board with at least one quad of memory

Memories should installed as quads and each quad must consists of equal density of DIMMs
Quads like 4*256 MB 4*512MB.....4*4GB

Best Regards
Murat
Murat Suluhan
Madhu Gopalakrishnan
Occasional Visitor

Re: RP 4440 Memory carrier board upgradation

Thanks for the responce.I am doing a memory carrier board upgradation (16 slot to 32 slot)on RP4440 Server.I have added A9739B(32-DIMM memory carrier board) in place of standard 16 slot memory carrier board. After the upgradation, no display on the Server.I have 2 no.s of A7135A (Dual 1.0 GHZ PA8800) processors on RP 4440 Server.

I suspect problem is because of compatibility issue with the 32 slot memory carrier board.

Regards/Madhu
Torsten.
Acclaimed Contributor

Re: RP 4440 Memory carrier board upgradation

Normally it is enough to swap the boards and install the dimms in a supported order.
Maybe contact problems?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Murat SULUHAN
Honored Contributor

Re: RP 4440 Memory carrier board upgradation

Hi Madhu

Arrange DIMMs so that the quads with the largest capacity are in the lowest numbered slots.

Did you checked contact problems as Torsten sayed


Best Regards
Murat
Murat Suluhan
Steven E. Protter
Exalted Contributor

Re: RP 4440 Memory carrier board upgradation

Shalom,

All relavent information is on the server documentation.

http://docs.hp.com/en/hw.html#HP%209000%20rp4410/rp4440%20Server

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Madhu Gopalakrishnan
Occasional Visitor

Re: RP 4440 Memory carrier board upgradation

there is no contact issues.
Murat SULUHAN
Honored Contributor

Re: RP 4440 Memory carrier board upgradation

Madhu Gopalakrishnan
Occasional Visitor

Re: RP 4440 Memory carrier board upgradation

My Server model no. is A7134B (HP 9000 RP4440 SERVER).As per the part information available for A7134B in hp site,32 slot memory carrier board supported is A9739A.

But i am having A9739B memory carrier board for upgradation....

that is the doubt for me...


Highlighted
Murat SULUHAN
Honored Contributor
Solution

Re: RP 4440 Memory carrier board upgradation

Hi Madhu

Following server models are active and this models support A9739B card

A9735C HP rx4640 1.5 GHz Bndl 6MB Solution Obsolete

A9950A HP rp4440-8 PA8900 800MHz Solution Active

A9951A HP rp4440-8 PA8900 1GHz Solution Active

A9955A HP rp4410-4 PA8900 800Mhz Solution Active

A9956A HP rp4410-4 PA8900 1Ghz Solution Active

Following server models obsolete but support your card

AB370A HP rx4640 Base System Solution Obsolete

A9735C HP rx4640 1.5 GHz Bndl 6MB Solution Obsolete

AB533A HP FAST Four rx4640 1.6G 9M CPU Solution Obsolete

Best Regards
Murat
Murat Suluhan