HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RP2470 system bus adapter function failure

 
Harsha
Occasional Contributor

RP2470 system bus adapter function failure

Following is the GSP Log contents.

SOURCE: 8=I/O
SOURCE DETAIL:2=system bus adapter SOURCE ID:6
PROBLEM DETAIL:3=function failure

Any ideas to get rid of this issue?

Thanks and Regards,
-Harsha-
8 REPLIES 8
RAC_1
Honored Contributor

Re: RP2470 system bus adapter function failure

Seems to be hardware problem to me. Call HP.

Are you able to boo the system??? Can you check the the said board for loose connections, loose cables etc.??

Anil
There is no substitute to HARDWORK
HGN
Honored Contributor

Re: RP2470 system bus adapter function failure

Hi

The server seem to be having issues related to Hardware, a case will have to be opened with HP on this

Rgds

Gopi
aliasgar
Valued Contributor

Re: RP2470 system bus adapter function failure

Hello Harsha,

can u post the chassis codes,


Thanks/regards,
Aliasgar.
aliasgar
shaun phelps
Occasional Advisor

Re: RP2470 system bus adapter function failure

hi

i'm having the same problem as u did, with the bus adapter function failure. did u find out the problem? if so could u be kind to tell me your solution!

cheers
shaun
Moez Alibhai
Advisor

Re: RP2470 system bus adapter function failure

Hi Harsha

I have been having the exact problem as you are having but its on a rp2405.

The server has goes down own its own.

its seems to be a firmware related issue.
im still working on it.

thanks
moez
aliasgar
Valued Contributor

Re: RP2470 system bus adapter function failure

Hi Moez,

can u post the chasis logs ,

Regards,
Aliasgar.
aliasgar
timmy b.
Honored Contributor

Re: RP2470 system bus adapter function failure

A message to all:

I recall correcting this problem by reseating the I/O cardcage. There are two screws and the lift lever to get it out, after you have removed the PCI card in slot 1.

Please be certain that you are using some type of static strap while doing this type of activity!

Also, please be aware that your server will not boot with the main cover removed, there is a lockout switch.

Good Luck - Tim
There are 10 kinds of people in this world: Those who understand Binary, and those who don't.
Moez Alibhai
Advisor

Re: RP2470 system bus adapter function failure


Log Entry # 1 :

SYSTEM NAME: uninitialized

DATE: 10/23/2005 TIME: 08:14:36

ALERT LEVEL: 2 = Non-Urgent operator attention required


SOURCE: 8 = I/O

SOURCE DETAIL: 2 = system bus adapter SOURCE ID: 4

PROBLEM DETAIL: 3 = function failure


CALLER ACTIVITY: 6 = machine check STATUS: 3

CALLER SUBACTIVITY: 34 = implementation dependent

REPORTING ENTITY TYPE: 0 = system firmware REPORTING ENTITY ID: 01


0x7000102382046343 00000000 00070200 type 14 = Problem Detail

0x5800182382046343 00006909 17080E24 type 11 = Timestamp 10/23/2005 08:14:36

Type CR for next entry, - CR for previous entry, Q CR to quit.