HPE Community
HPE 9000 and HPE e3000 Servers
1753775 Members
7624 Online
108799 Solutions
New Discussion

Re: RP4440 CPU deactivation

 
System Administrator_12
Occasional Advisor

‎10-15-2007 07:57 AM

‎10-15-2007 07:57 AM

RP4440 CPU deactivation

Due to a software licensing requirement, I have been asked to disable half of the CPUs on my RP4440. The server has 4 dual modules for a CPU count of 8. In the past on a N4000 server I was able to interrupt the boot and disable CPUs. Can this be done on a RP4440?
0 Kudos
1 REPLY 1
Phil uk
Honored Contributor

‎10-15-2007 08:07 AM

‎10-15-2007 08:07 AM

Re: RP4440 CPU deactivation

Hi,

You can certainly interrupt BCH and go to the Configuration Menu (CO).

From here you can select:

CPUconfig [] [ON|OFF]

....and deconfigure CPU's as required.

Whether this is the correct way to do it from a licensing point of veiw....i'm not sure.
Phil
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.