HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RP4440 server system led Blinking

 
dipesh_2
Regular Advisor

RP4440 server system led Blinking

Hello,
The System LED on my rp4440 server is blinking RED all the time even between the reboots, although the HPUX seems to run fine. The manual doc states that the red light means "Hard Fault, system halted", but it's running on. i checked the system evnet log which describe as below.


# Location|Alert| Encoded Field | Data Field | Keyword / Timestamp
-------------------------------------------------------------------------------
29 SFW 0 *5 0xEE8000D800E00260 0000000256680906 MEM_PDT_TABLE_FULL
28 Jun 2006 14:06:59
28 SFW 0 2 0x448000A700E00240 FFFFFFFF004AFF74 MEM_CORR_ERR
28 Jun 2006 14:06:59
27 BMC 2 0x2044A28CC2020230 FFFF027000120300 Type-02 127002 1208322
28 Jun 2006 14:05:54
26 MP 0 2 0x4E800A7B00E00210 0B0010FF00000000 MP_SOFT_RESET
02 Feb 2006 03:41:16
25 MP 0 2 0x5E800A7A00E001F0 0000000000000004 MP_SELFTEST_RESULT
02 Feb 2006 03:41:16
24 BMC 2 0x2043A70C870201E0 FFFF027000120300 Type-02 127002 1208322
19 Dec 2005 19:39:51
23 SFW 0 2 0x4380107400E001C0 0000000000000000 MC_OS_TOC_MISSING
19 Dec 2005 19:36:15
22 SFW 0 2 0x57800F7300E001A0 2000000000000000 ERR_CPU_CHECK_SUMMARY
19 Dec 2005 19:36:12
21 BMC 2 0x2043A6B0C0020190 FFFF027000120300 Type-02 127002 1208322
19 Dec 2005 13:08:16

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: RP4440 server system led Blinking

Hi,

the event

MEM_PDT_TABLE_FULL

is critical and probably the reason for the blinking light. This means you have a memory problem.
The best idea is probably to contact your HP support to get the problems analyzed.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Phil uk
Honored Contributor

Re: RP4440 server system led Blinking

Hi,
Looking at the info in the log, specifically:0x448000A700E00240 FFFFFFFF004AFF74 MEM_CORR_ERR

This would possibly indicate at single bit correctable error on DIMM 4A.

The fact that PDT is full would suggest you are having alot of repeated memory errors - possibly from the above mentioned DIMM.

It would be worth logging a fault call with HP and sending all of the logs along with the PDT information - this may help to conclude that a single DIMM is generating lots of errors and needs to be replaced.