HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RP74000 A3639-69125

 
SOLVED
Go to solution
william_161
Advisor

RP74000 A3639-69125

Hi All
I've got a RP7400 with a system board (A3639-69125)and a 750MHz processor, The server doesnt show that speed for some reason and i want to know whats the swtich settings on the system board to show 750MHz, The switch configuration doesnt seem to be on the system board like most of the N-Class that runs up to 550MHz processor

thanks in advance
5 REPLIES 5
Thayanidhi
Honored Contributor
Solution

Re: RP74000 A3639-69125

Did you check the speed of CPU in SAM?
SAM->performancemonitors->systemproperties

Or use the below command.

echo itick_per_usec/D | adb -k /stand/vmunix /dev/kmem

The switch settings are

s1: 1 2 3 4 5 6 7 8
750 1 0 0 1 1 0 1 0
650 1 0 1 1 1 0 1 0

1=on, 0= off

Make sure you have correct system board which supports 750 Mhz..

Regds
TT
Attitude (not aptitude) determines altitude.
Stf
Esteemed Contributor

Re: RP74000 A3639-69125

are you sure you have the correct Processor Support Module for 750 MHz which is : A6689A

Stf ;-)
william_161
Advisor

Re: RP74000 A3639-69125

Thanks Thayanidhi

william_161
Advisor

Re: RP74000 A3639-69125

Thanks Thayanid

That switch setting did the trick
Ken Bhatt
Occasional Visitor

Re: RP74000 A3639-69125

Many thanks for your help. Supplier did not know the switch setting.

Regards

Ken Bhatt