HPE 9000 and HPE e3000 Servers
1748151 Members
3626 Online
108758 Solutions
New Discussion юеВ

Re: RP7410 - CELL BOARD ERRORS WHEN BOOTING

 
Moez Alibhai
Advisor

RP7410 - CELL BOARD ERRORS WHEN BOOTING

I get the below error, when booting RP7410.

When i power cycle the server couple of times, it than comes up.

66 PDC 0,1,0 *10 0x180041a3820036ec 0x0000000000000000
66 PDC 0,1,0 *10 0x58004900000036e0 0x00006c0b0b052d38 05/19/2009 05:45:56
65 PDC 0,1,0 *2 0x2000472071266dc2 0x00ffff01ffffff93 ERR_DNA_MHG_FEWPJ__LOC
65 PDC 0,1,0 *2 0x58004f0000006dc0 0x00006c0b0b052d0e 05/19/2009 05:45:14
64 PDC 0,1,0 *2 0x7000462071266dc2 0x0000000000b90200 ERR_DNA_MHG_FEWPJ__DET
64 PDC 0,1,0 *2 0x58004e0000006dc0 0x00006c0b0b052d0e 05/19/2009 05:45:14
63 PDC 0,1,0 *2 0x20004520710b6de3 0x00ffff01ffffff93 ERR_DNA_MPD_FEW__LOC
63 PDC 0,1,0 *2 0x58004d0000006de0 0x00006c0b0b052d0e 05/19/2009 05:45:14
62 PDC 0,1,0 *2 0x70004420710b6de3 0x0000000000b90200 ERR_DNA_MPD_FEW__DET
62 PDC 0,1,0 *2 0x58004c0000006de0 0x00006c0b0b052d0e 05/19/2009 05:45:14
61 PDC 0,1,0 *2 0x2000432093096eb2 0x00ffff01ffffff93 ERR_DNA_ROUT_FEWIREIN__LOC
61 PDC 0,1,0 *2 0x58004b0000006eb0 0x00006c0b0b052d0e 05/19/2009 05:45:14
60 PDC 0,1,0 *2 0x7000422093096eb2 0x0000000000b90200 ERR_DNA_ROUT_FEWIREIN__DET
60 PDC 0,1,0 *2 0x58004a0000006eb0 0x00006c0b0b052d0e 05/19/2009 05:45:14
59 PDC 0,1,0 *2 0x2000412393086eb1 0x00ffff01ffffff93 ERR_DNA_RIN_FEWIREIN__LOC
59 PDC 0,1,0 *2 0x5800490000006eb0 0x00006c0b0b052d0e 05/19/2009 05:45:14
58 PDC 0,1,0 *2 0x7000472393086eb1 0x0000000000990200 ERR_DNA_RIN_FEWIREIN__DET
58 PDC 0,1,0 *2 0x58004f0000006eb0 0x00006c0b0b052d0e 05/19/2009 05:45:14
57 PDC 0,1,1 *2 0xb800562011016c2c 0x0000000000000000 ERR_CPU_RUNWAY_BROAD_ERR
57 PDC 0,1,1 *2 0x58005e0000006c20 0x00006c0b0b052d0e 05/19/2009 05:45:14
56 PDC 0,1,0 *2 0xb800452011006c2c 0x0000000000000000 ERR_CPU_RUNWAY_BROAD_ERR
56 PDC 0,1,0 *2 0x58004d0000006c20 0x00006c0b0b052d0e 05/19/2009 05:45:14
55 PDC 0,1,1 *7 0x40005370000062ef 0x000000787f803b64 ERR_CHECK_HPMC
55 PDC 0,1,1 *7 0x58005b00000062e0 0x00006c0b0b052d0c 05/19/2009 05:45:12
54 PDC 0,1,0 *7 0x40004270000062ef 0x000000787f89e95c ERR_CHECK_HPMC
54 PDC 0,1,0 *7 0x58004a00000062e0 0x00006c0b0b052d0c 05/19/2009 05:45:12
53 PDC 0,1,0 *10 0x180041a3820036ec 0x0000000000000000


Please assist.
Thank You
Moez
7 REPLIES 7
tkc
Esteemed Contributor

Re: RP7410 - CELL BOARD ERRORS WHEN BOOTING

maybe one of the cells is giving problem. get the tombstone files anaylsed. there are located in the /var/tombstones directory.
Jozef_Novak
Respected Contributor

Re: RP7410 - CELL BOARD ERRORS WHEN BOOTING

If the server is covered by a support contract, open a call at HP and let them analyze the console logs.

J.
Moez Alibhai
Advisor

Re: RP7410 - CELL BOARD ERRORS WHEN BOOTING

Its an Old In-House server, i have been trying bring it back to life.

I have done the firmware upgrade, it went successfully. the errors still persist.

Could it be the cell board ?
suda
Visitor

Re: RP7410 - CELL BOARD ERRORS WHEN BOOTING

all the errors are triggerd from Cell1.
paste the MP:CM>ps command output for all the cells installed in the system
cnb
Honored Contributor

Re: RP7410 - CELL BOARD ERRORS WHEN BOOTING

Moez,

Yes. Pull Cell 1 and reboot to see if the system stabilizes, then post the ts99 file. Cell 1 is reporting multiple fatal errors.

hth,
Moez Alibhai
Advisor

Re: RP7410 - CELL BOARD ERRORS WHEN BOOTING

Hi

Have attached the ts99 file

Re: RP7410 - CELL BOARD ERRORS WHEN BOOTING

Summary: An error has occurred to a rope
Description: An error was detected that is associated with the initialization
or normal operation of a rope.
Cause:

Unable to successful perform operations to a rope.

Action:

Process the actions in order until the problem is removed:

1. Fix all previously reported errors
2. Validate that the I/O card attached to the rope is healthy
3. Contact HP Support to troubleshoot the PCI system backplane,
system backplane, cell board.