RP7410 CPU de configration

[Sreejith Kaliyam]

Hi,

We have two HW(npar) partition running on RP7410.one of the partition has four CPU.Since We have application licensing limitation( which is per CPU),We would like to de allocate two CPU temporary till we get license for four CPU.how Can I manually de configure CPU ??

Thanks in advance

Regards/anoop

[Robert-Jan Goossens · Accepted solution]

Hello Neil,

Check this doc.

Configuring and Deconfiguring Processors (CPUs)

http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/5990-8170/5990-8170_top.html&con=/hpux/onlinedocs/5990-8170/00/00/93-con.html&toc=/hpux/onlinedocs/5990-8170/00/00/93-toc.html&searchterms=cpu%7cdeconfigure&queryid=20041024-032508

Best regards,
Robert-Jan

[Ranjith_5]

Hi ,

There are 2 ways to allocate and de allocate nPARS.

1.from BCH menu and
2.from EFI shell.

pls see the attached doc.

Hope this helps you. Pls do revert abt ur problem resolution , and also for more info.

Regards,
Syam

[Sreejith Kaliyam]

Hi Robert/Syam,

I could do it before I read both of your reply.I followed exactly the same way as you ppl are mentioned.

Once more thank you very much for you time

Regards/anoop