HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RP7410 cant boot

 
alfred keoy
Occasional Advisor

RP7410 cant boot

From MP log

Appreciate if somebody could assist me in decoding the MP log error.

Alert Level 10: Lost functionallity; Keyword: IODISC_CC_RI_ERR
I/O system bus adapter 0; status 12
Logged by system firmware 4 during deconfiguration subActivity 21
Device Status: 0x0000000000050000

Alert Level 2: Non-urgent alert; Keyword: ERR_DNA_MHG_FEWPJ_LOC
Memory controller 38; status 2
Logged by system firmware 4 during deconfiguration subActivity dc
cell controller chip location: cabinet 0 cell 1
Device Status: 0x0000000000050000

IODISC_LBA_DECONFIGURED
alert 10
i/o local bus adapter 0 dissable device; status 12
cabinet 0 i/o bay 0 slot 5
slot 6,7,8

Thank you
Alfred




1 REPLY 1
Peter Godron
Honored Contributor

Re: RP7410 cant boot

Alfred,
please see Event 1280 at:
http://docs.hp.com/en/diag/ems/dm_chassis.htm

Your particular error:
SBA not powered, or in reset

Check the internal cables, then call HP.

Your deconfigured message is detailed at Event 1284 at above location.


Please also read:
http://forums1.itrc.hp.com/service/forums/helptips.do?#33 on how to reward any useful answers given to your questions.

So far you have not awarded any points !